How to Clean Bathroom Floor With Acid

Sharing is caring!

When you can not clean your bathroom stains by the typical way of cleaning, you can use acid for toilet cleaning.

However, it would be the final option for bathroom cleaning. Because of health hazards, most people want to avoid this process. 

But some tough stains are not removable by ordinary methods. It requires acid to clean up some oily stains. 

Don’t worry, how to clean the bathroom floor with acid is not a difficult task but you have to be careful at all. Take necessary steps by using hand gloves and goggles for your safety.

Cleaning Preparation

Remove all the dust and hair from the bathroom floor when you clean the bathroom with acid. Dusty things are more accessible to clear than the nasty wet stuff.

Select an acid that has the strength to clean the tiles. Check the ratio of acid and water carefully before applying it.

What do you need?

Before starting to clean your bathroom, make sure you have all the elements in hand. For an acid wash, you require:

  1. Five-gallon bucket
  2. Plenty of water
  3. One cup Hydrochloric acid
  4. One cup Ammonia 
  5. Plastic cup for acid measurement
  6. Spray bottle
  7. Face mask
  8. Hand gloves
  9. Googles

Bathroom Cleaning Procedure by Acid

Follow the steps one by one to clean your bathroom with acid:

Step 1:

First, ventilate the bathroom by opening the door or window. Switch on the exhaust fan or place an extra fan to ensure ventilation. Put your face mask, gloves, and goggles on your health care.

Step 2:

Combine one cup of ammonia with one gallon of water. It can neutralize the acid reaction. Take a five-gallon container and fill it with one gallon of water.

Pour the then slowly mix one cup of hydrochloric acid with water. Take water before acid to avoid chemical reactions. Measure the acid with a plastic cup. Spill the acid mixture into a spray bottle for easy use.

Step 3:

Now apply the mixture to the bathroom floor stains. Let them sit for 10 seconds, then rinse with plenty of water. Then neutralize the tiles with the ammonia mixture.

Step 4:

Every time apply in a small area for cleaning. You can repeat 7-10 times on the remaining tiles.

Step 5:

Try a stiff brush to scrub the tiles and remove all the acid residues there. Then rinse with water again. 

Precautions:

  • Do not measure acid with a metal container.
  • Never touch the acid with a bare hand. 
  • Neutralize immediately if another surface goes to near acid.
  • Do not use acid cleaner on a granite floor.

Conclusion

For getting the sparkling bathroom tiles, you can wash them with acid. By using the acid, your bathroom may look new. But How to clean the bathroom floor with acid is a matter of cautiousness.

Because acid can cause dangerous health hazards, please take it as the last option of your cleaning choice. Be clean, be happy!

Leave a Comment