How To Clean Bissell Proheat Pet Turbo

Keep Your Bissell Proheat Pet Turbo Clean: A Full Guide

Having a Bissell Proheat Pet Turbo carpet cleaner helps me keep my home fresh. This machine is great at tackling pet messes and tough stains. But like any hard-working appliance, it needs regular cleaning itself. Dirty water, pet hair, and cleaning solution residue build up inside. This buildup can make your cleaner less effective and even cause bad smells.

I understand the frustration of a machine that doesn’t clean as it should. A clean machine performs its best. It also lasts longer. This article helps you understand how to clean Bissell Proheat Pet Turbo. We will go through each part of the cleaning process. This guide covers everything from the dirty water tank to the brushes. You will find clear steps and useful tips.

Takeaway

Keeping your Bissell Proheat Pet Turbo clean is simple. Regular maintenance ensures it performs its best. Follow these key steps:

Empty and rinse tanks after each use.
Clean the brush roll, nozzle, and filters often.
Wipe down the exterior.
Store the machine properly.

How do you clean a Bissell Proheat Pet Turbo?

You clean a Bissell Proheat Pet Turbo by emptying and rinsing the water tanks immediately after use. Then, remove and clean the brush roll and nozzle to remove hair and debris. Clean any filters. Wipe down the machine’s exterior. This regular cleaning keeps your machine working well and prevents odors.

Why Regular Cleaning Matters for Your Bissell Proheat Pet Turbo

Your Bissell Proheat Pet Turbo works hard. It pulls up dirt, grime, and pet accidents from your carpets. Over time, these messes do not disappear. They collect inside the machine itself. This buildup can stop your cleaner from working its best.

Think about it: dirty water and hair get trapped in the tanks and brushes. If you do not clean them, foul odors can develop. These odors then transfer back onto your clean carpets. A clogged brush cannot agitate carpet fibers well. This means your carpet does not get truly clean. So, cleaning your Bissell Proheat Pet Turbo is not just about hygiene. It ensures efficient, effective cleaning every time you use it.

Extend Your Machine’s Life

Regular cleaning helps your Bissell Proheat Pet Turbo last longer. Dirt and grime can wear down moving parts. They can clog filters and hoses. This stress on the motor and other components causes premature failure. By removing these obstructions, you reduce strain. Your machine runs smoother. This saves you money in the long run.

Skipping maintenance might lead to expensive repairs. Or it could mean buying a new machine sooner than expected. I always make sure to clean mine after each use. This simple habit keeps my investment safe. It also ensures my carpets are always deeply cleaned. Keeping up with this care extends the useful life of your carpet cleaner.

Maintain Cleaning Power and Freshness

A clean machine cleans better. A dirty brush roll cannot scrub carpets effectively. A clogged suction nozzle cannot pull up dirty water. This leaves your carpets wetter and dirtier than they should be. Residual pet hair and dirt can even get redeposited.

I want my carpets to smell fresh, not like old pet messes. Cleaning the machine prevents this. It removes all traces of previous cleanings. This keeps your home smelling truly clean. The Proheat Pet Turbo’s purpose is to remove pet stains and odors. If the machine itself harbors those odors, it defeats the purpose. Ensuring its internal components are clean prevents this issue.

Gather Your Tools: What You Need to Clean Your Bissell Proheat Pet Turbo

Before you start cleaning your Bissell Proheat Pet Turbo, get everything ready. Having all the right tools makes the process simple. It ensures you complete each step without interruption. You likely already own most of these items.

These are common household cleaning supplies. They are safe for your machine. Proper preparation saves time and effort. I gather my supplies before I even unplug the machine. This way, I do not have to stop midway through the cleaning process.

Essential Cleaning Supplies

Here is a list of what you will need. Each item has a specific purpose. Using the correct tools makes cleaning efficient.

Gloves: Protect your hands from dirt and cleaning solutions.
Warm Water: Used for rinsing tanks, brushes, and other parts.
Mild Dish Soap: Helps cut through grime and residue.
Old Towels or Rags: For wiping down parts and drying.
Small Brush (e.g., old toothbrush, cleaning brush): For scrubbing small crevices and hard-to-reach areas.
Paper Towels: For quick drying or picking up small bits of debris.
Hair Removal Tool (often included with cleaner, or scissors): To cut and remove tangled hair from the brush roll.
Bucket: To hold dirty water or soak parts.
Optional: Vinegar: A natural deodorizer for tough odors. You can learn more about how to clean with vinegar and baking soda.

Make sure you have enough space to work. Choose an area where you do not mind a little water mess. A laundry room or garage floor works well. This preparation helps you stay focused on the task.

Safety First

Cleaning your appliance is safe. Still, remember a few simple safety rules. Always unplug your Bissell Proheat Pet Turbo before you start cleaning any part of it. This prevents accidental starts. It also protects you from electric shock.

Wear gloves to protect your hands from dirt and potential irritants. Some cleaning solution residue can be harsh. Dispose of dirty water properly. Do not pour it back onto clean carpets. Following these simple rules keeps you safe during the cleaning process. My personal rule is always “unplug first, then clean.”

Step-by-Step Guide to Cleaning the Dirty Water Tank and Filters

The dirty water tank is where all the extracted grime collects. It is often the dirtiest part of your Bissell Proheat Pet Turbo. Cleaning it immediately after each use is vital. This prevents odors and mold growth. Neglecting this tank affects your machine’s performance.

I always make this my first cleaning step. It is the most impactful action for maintaining freshness. The dirty water tank holds a mixture of water, cleaning solution, dirt, pet hair, and dander. If this mixture sits for too long, it grows bacteria. This bacteria causes foul smells. It also contributes to machine malfunction over time.

Emptying and Rinsing the Dirty Water Tank

This is a quick and essential step. Do this immediately after you finish cleaning your carpets. The longer dirty water sits, the harder it is to clean.

Remove the tank: Press the release button or lift the handle to detach the dirty water tank from the machine.
Empty content: Pour all the dirty water and debris into a utility sink or toilet. You will see a lot of hair and grime. This is normal.
Rinse thoroughly: Fill the tank with warm water. Swish it around vigorously. Pour it out. Repeat this step several times until the water runs clear. Pay attention to corners and crevices where dirt might hide. A little dish soap can help break up residue.
Clean the float stack: Many dirty water tanks have a float stack mechanism. This stops the machine when the tank is full. Remove this part if possible. Rinse it well under running water. Use a small brush to dislodge any hair or debris. Make sure it moves freely.
Dry: Let the tank air dry completely before putting it back on the machine. This prevents mold and mildew. I leave mine upside down in the sink overnight. This ensures complete dryness.

Cleaning the Filters

Your Bissell Proheat Pet Turbo has filters. These filters stop debris from reaching the motor. Keeping them clean is critical for suction power. Clogged filters reduce airflow. This makes your machine less effective. It also strains the motor.

The number and location of filters vary by model. Check your machine’s user manual for exact filter locations. Most models have a pre-motor filter and sometimes a post-motor filter.

Locate filters: Turn off and unplug your machine. Find the filters. The pre-motor filter is often near the dirty water tank. It might be a foam or pleated filter.
Remove debris: Gently tap the filter over a trash can to remove loose dirt. You will be surprised how much dust and hair collects.
Rinse (if washable): If your filter is washable, rinse it under cool running water. Squeeze foam filters gently to release dirt. Continue rinsing until the water runs clear. Do not use soap on filters unless the manual says it is safe.
Dry completely: Allow filters to air dry for at least 24 hours. They must be bone dry before you put them back. Putting a wet filter back can damage your machine. I often place mine on a clean towel in a well-ventilated area.

Properly cleaning the dirty water tank and filters helps maintain peak performance. It also helps in preventing those dreaded stale odors. My machine always feels lighter and more efficient after I clean these parts.

Keeping the Brushes and Nozzle Clean for Best Performance

The brush roll and nozzle are critical components of your Bissell Proheat Pet Turbo. The brush roll agitates carpet fibers. It helps loosen dirt and pet hair. The nozzle creates the suction path. It pulls dirty water and debris into the tank. These parts get very dirty during use.

If you skip cleaning these parts, your machine cannot clean well. Hair gets tangled in the brushes. Dirt clogs the nozzle. This reduces cleaning effectiveness significantly. I always pay close attention to these components. They are the heart of the cleaning action.

Cleaning the Brush Roll

Pet hair loves to wrap around the brush roll. This is especially true for pet owners. Tightly wound hair prevents the brushes from spinning freely. This stops them from agitating the carpet. You need to remove this hair for proper cleaning.

Access the brush roll: Turn off and unplug your machine. Lay it on its side or back. Most Bissell Proheat models allow easy access to the brush roll cover. You might need a screwdriver for some models. Remove the brush window or cover.
Remove hair and debris: Use scissors or the hair removal tool provided with your Bissell. Carefully cut along the length of the brush roll. Cut any hair or string that is wrapped around it. Be careful not to cut the brush bristles themselves.
Pull off tangled material: Once cut, the tangled hair and fibers should pull off easily. Discard this material.
Wipe the brush roll: Use a damp cloth to wipe down the bristles and the entire brush roll. Remove any remaining dirt or cleaning solution residue. You can use a mild dish soap solution for stubborn grime.
Inspect for damage: Check the bristles. Make sure they are not bent or matted. Ensure the brush spins freely. If it feels stiff, there might be hidden debris.
Reassemble: Once clean and dry, put the brush roll back. Secure the brush window or cover.

A clean brush roll makes a big difference. It brings life back to your carpet cleaning. It helps the machine scrub effectively.

Clearing the Suction Nozzle

The suction nozzle pulls up the dirty water. It often gets clogged with larger debris, hairballs, or even pet waste. A clogged nozzle means poor suction. This leaves carpets wet and dirty.

Access the nozzle: The nozzle is usually located directly in front of the brush roll. It is often transparent or translucent. This allows you to see clogs.
Remove visible clogs: Look for any large pieces of debris. Use your fingers or a pair of pliers to pull out visible clumps of hair or dirt.
Rinse under running water: If the nozzle is removable, take it off. Rinse it thoroughly under warm running water. Use a small brush, like an old toothbrush, to scrub away any stuck-on grime or residue. Ensure all channels are clear.
Check for blockages: Hold the nozzle up to a light. Make sure you can see through all the suction pathways. If there are still blockages, try using a thin, blunt object to push them through.
Clean the hose leading to the nozzle: Sometimes the clog is not in the nozzle itself. It can be further up the suction hose. Most Proheat models have a removable hose connector for the nozzle. Check and rinse this if possible.
Dry and reattach: Allow the nozzle to air dry completely. Then, reattach it securely to your machine.

Cleaning these vital parts ensures your Bissell Proheat Pet Turbo runs at peak efficiency. It prevents redepositing dirt and leaves your carpets cleaner. Regular attention to the brush and nozzle keeps your machine happy and your floors pristine.

Deep Cleaning the Hose, Tools, and External Parts of Your Bissell

Your Bissell Proheat Pet Turbo comes with various attachments. These tools help clean upholstery, stairs, and tight spaces. The hose connects these tools to the main unit. These parts also collect dirt, pet hair, and cleaning solution residue. For a truly clean machine, you must clean these components as well.

Neglecting the hose and tools can lead to stale odors. It also reduces the effectiveness of your spot cleaning. I always make sure to give these accessories a good clean. This ensures they are ready for the next tough spot or pet accident. Cleaning the exterior also makes the machine look great. It helps maintain its functionality. You can also apply what you learn here to other Bissell devices, such as how to clean a Bissell Powerfresh steam mop.

Cleaning the Hose and Attachment Tools

The hose is a common place for hair and dirty water to get trapped. The attachment tools touch the most concentrated messes.

Detaching the hose: Disconnect the hose from the main unit. This usually involves pressing a release button or twisting it off.
Flushing the hose: Take the hose to a utility sink or bathtub. Hold one end under running warm water. Let the water run through until it comes out clear from the other end. You might see dirty water or hair clumps exit. Repeat this several times. For stubborn clogs, a gentle blast from a spray nozzle can help.
Cleaning attachment tools: Remove all attachment tools (e.g., tough stain tool, spraying crevice tool). Rinse them under warm running water. Use a small brush, like an old toothbrush, to scrub bristles and narrow openings. Pay attention to any transparent parts where dirt is visible.
Soak (if needed): For tools with heavy grime, soak them in a bucket of warm water with a few drops of mild dish soap for 15-20 minutes. This helps loosen dried-on residue.
Rinse and dry: Rinse all tools thoroughly after cleaning. Ensure no soap residue remains. Allow the hose and tools to air dry completely before reattaching them. I often hang the hose to ensure all water drains out.

Cleaning these accessories ensures your targeted cleaning efforts are effective. It also prevents the spread of odors. You would be surprised how much grime these tools can hold. Knowing how to clean your couch with a Bissell Little Green can also give you insight into effective upholstery cleaning and tool maintenance.

Wiping Down the Exterior and Wheels

The outer casing of your Bissell also gets dirty. Spills, splashes, and dust accumulate. Cleaning the exterior keeps your machine looking good. It also prevents dirt from transferring to your hands or clean floors.

Prepare cleaning solution: Dampen a clean cloth with warm water. Add a drop or two of mild dish soap if desired.
Wipe the exterior: Wipe down all external surfaces of the machine. Pay attention to handles, control panels, and the base. Remove any dust, dirty water spots, or fingerprints.
Clean the wheels: The wheels can pick up a lot of hair and dirt from the floor. Use your damp cloth or a paper towel to clean them. Use a small brush or a pick to remove any hair or debris wrapped around the axles. Clean wheels help the machine roll smoothly.
Dry: Use a dry cloth to wipe down the machine after cleaning. This removes any streaks. It also ensures there is no residual moisture.
Check cords: Briefly inspect the power cord. Look for any fraying or damage. If you see any, do not use the machine until it is repaired by a professional.

A clean exterior makes the whole machine feel new. It also makes you more likely to use it. This thorough cleaning helps your Bissell Proheat Pet Turbo perform optimally. It ensures it remains a valuable tool for maintaining a clean home.

Preventative Care: Tips to Keep Your Bissell Proheat Pet Turbo Cleaner Longer

Regular cleaning is a must. But small habits can keep your Bissell Proheat Pet Turbo in top shape between deep cleans. Preventative care saves you time later. It keeps your machine working efficiently. These simple tips become second nature over time.

I always tell people that prevention is easier than cure. This is true for appliance maintenance. A little bit of care after each use prevents big problems later. These tips focus on minimizing dirt buildup and ensuring proper operation. This means your machine will be ready when you need it most, especially for unexpected pet messes. This also helps with other challenging clean-ups, like how to clean a subfloor from pet urine.

Immediate Post-Use Practices

The most important step is what you do right after you finish cleaning carpets. Quick action prevents grime from drying and sticking.

Empty and rinse tanks immediately: As discussed earlier, this is non-negotiable. Do not let dirty water sit in the tank. It can start to smell bad very quickly. I empty mine into the toilet. Then, I rinse it until the water runs clear.
Run clean water through the machine: After emptying the dirty tank, fill the clean water tank with plain warm water (no solution). Run the machine over a non-carpeted area, like tile or a garage floor, for 30-60 seconds. This flushes out residual cleaning solution from the spray nozzles and suction path. It helps keep the internal lines clear.
Wipe down brush area: Quickly wipe down the brush roll area and nozzle after flushing. This removes any loose hair or large debris before it dries on. A quick swipe with a paper towel can do wonders.
Allow air circulation: Leave the dirty water tank slightly ajar or removed after cleaning. This allows air to circulate. It helps dry out the tank and prevents musty odors.

Proper Storage and Maintenance Habits

Where and how you store your Bissell matters. Proper storage protects the machine from dust and damage.

Store in a dry place: Always store your carpet cleaner in a dry, temperate area. Avoid garages that get very cold or damp basements. Extreme temperatures and humidity can damage electronic components and seals.
Coil the cord neatly: Neatly coil the power cord after each use. Wrap it around the cord hooks on the machine. This prevents tangles and damage to the cord. A damaged cord is a safety hazard.
Check for odd noises: Listen to your machine during use. If you hear new or strange noises, investigate. It might signal a loose part or an impending issue. Early detection can prevent bigger problems.
Follow manufacturer’s recommendations: Always read your Bissell Proheat Pet Turbo user manual. It contains specific care instructions for your model. It also provides troubleshooting tips. My manual has been a lifesaver for identifying parts.
Use appropriate solutions: Only use Bissell-brand cleaning formulas. Other solutions can void your warranty. They can also damage the internal components of your machine. Some non-Bissell formulas might leave excessive residue. This causes blockages over time.

By incorporating these preventative care tips, you ensure your Bissell Proheat Pet Turbo remains a reliable tool. You keep it ready to tackle any mess. Consistent care pays off with consistent performance.

Frequently Asked Questions About Cleaning Your Bissell Proheat Pet Turbo

Here are common questions about keeping your Bissell Proheat Pet Turbo clean. These answers help address typical concerns.

How often should I clean my Bissell Proheat Pet Turbo?

You should clean your Bissell Proheat Pet Turbo after every single use. This includes emptying and rinsing the tanks. A deeper clean, involving the brush roll and nozzle, should happen every 3-5 uses or as needed. If you clean very dirty areas or many pet messes, clean more often. Regular quick cleans prevent major buildups.

Can I use vinegar to clean my Bissell Proheat Pet Turbo?

Yes, you can use diluted white vinegar for rinsing parts like the dirty water tank or even running through the machine. Mix equal parts water and white vinegar. This helps deodorize and remove mineral buildup. However, do not use vinegar in the clean water tank with your cleaning solution, as it may react. Always rinse well after using vinegar.

What causes a bad smell in my Bissell Proheat Pet Turbo?

A bad smell in your Bissell Proheat Pet Turbo usually comes from dirty water sitting in the tank. It can also come from pet hair and debris caught in the brush roll or nozzle. These trapped organic materials decompose. They create foul odors. Not drying components completely also leads to mold or mildew growth.

Why is my Bissell Proheat Pet Turbo not suctioning well?

Poor suction in your Bissell Proheat Pet Turbo often means a clog. Check the dirty water tank for overfilling. Examine the suction nozzle and brush roll area for hair and debris. Also, clean the filters thoroughly. A blocked hose or a damaged float stack can also cause reduced suction.

Can I put the brush roll in the dishwasher?

No, you should not put the brush roll or any other Bissell Proheat Pet Turbo parts in the dishwasher. Dishwashers use very hot water and harsh detergents. These can warp plastic parts or damage bristles. Always hand wash and air dry components to ensure their longevity.

Conclusion

Keeping your Bissell Proheat Pet Turbo clean is simple. It ensures your machine works its best. A clean carpet cleaner pulls out more dirt. It leaves your carpets truly fresh. You also extend the life of your valuable appliance. This saves you money in the long run.

I hope this guide has shown you how easy it is to maintain your Bissell Proheat Pet Turbo. Regular care means less hassle for you. It means more effective cleaning for your home. Make cleaning your machine part of your routine. Your carpets, and your wallet, will thank you. For more cleaning tips and guides, visit BeaCleaner.com. Start your cleaning journey today!