Vinyl floors can withstand a lot of abuse even in the house’s busy areas, but they still need to be serviced and cleaned to make it better. We show you how to clean vinyl floors with vinegar.
Clean dirt with running water as soon as it occurs to avoid stains. You need to clean the floor about once a week more carefully. First, vacuum the floor or wipe it with a dry mop to remove dust, hair, and dirt.
Later, you are ready to consider shifting to use a wet MOP and to add some cleaning solution. You can easily buy Commercial Vinyl floor cleaners. You can try an effective Vinyl floor cleaner by mixing Apple cider vinegar with water.
The vinegar’s acidity removes dirt without leaving a soap film; mix a cup of apple cider vinegar with a gallon of hot water. Use a damp mop to apply to the floor, often washing the mop with clean, warm water from another bucket or sink.
For additional cleaning power, add a few drops of liquid detergent to the mixture of water and vinegar. Wipe first with a mix of soap and then a second time with a combination of water and vinegar.
Table of Contents
Will Vinegar Damage Vinyl Floors?
White vinegar is a common ingredient in many household floor cleaners. It should not be used on some household surfaces as it can cause damage.
Fortunately, luxury vinyl floors are not one of those surfaces. Apple cider vinegar is an excellent cleaner for vinyl floors. The acidity in vinegar can remove dirt and grime without deposits and residue such as soap can. Make sure you do not use high-strength vinegar to clean the floors.
It can dull the end, and you have no way to polish the vinyl floor to bring back shine. To make a homemade floor cleaner with vinegar, mix a Cup of Apple cider vinegar with a gallon of water.
Then you can use a damp mop to clean the floor. Be sure to rinse the mop frequently with warm water during cleaning. If you want to disinfect and clean the floors simultaneously, you can use white vinegar.
If your floors are filthy, add a few drops of liquid detergent to the mixture of vinegar and water before cleaning. Then they return to their soil a second time with only water and vinegar.
Finally, if you want to give your floors some shine, a few drops of baby oil in a cleaning solution with water and vinegar will suffice.
What Is the Best Vinyl Floor Cleaner?
One of the best vinyl floor cleaners is apple cider vinegar. Acidity in the vinegar helps to remove dirt and dirt without building up soap or wax.
Mix a cup of apple cider vinegar with a gallon of hot water and use a damp mop to clean, often rinse the mop with warm water. Replace the white vinegar with apple cider vinegar if you want to disinfect during cleaning.
If your floor is filthy, try adding a few drops of liquid detergent to the mixture before washing it once with the soap mixture, a second time with vinegar and water.
To give your vinyl floor shine, add a few drops of baby oil to a solution of vinegar and water.
Can You Use Dawn to Clean Vinyl Floors?
Looking clean more than every day, and you wonder what to do with these hard stains of rubber or paint that you might fear impossible to remove?
A spatula is a great tool for scraping off gum or paint, but be gentle not to damage the floor. For stains, consisting of grape juice, ink, tomato sauce, ketchup, lipstick, or others that you believe hard to eliminate, works wonders with baking soda paste!
Apply a paste of baking powder with water, rub gently using a soft cloth and wipe it until the stains are no more visible.
To thoroughly clean the vinyl floor, mix a gallon of water with a cup of apple cider vinegar. (White vinegar is a good substitute.) Add a drop of detergent for additional cleaning.
Ideally, fill a second bucket with clean, warm water to remove the dirt from the mop as you work (rather than putting it back on the floor). Drain the mop well, then dip into the vinegar solution and drain again.
Anything that needs to be twisted is a must, as too much water gets into the joints of your vinyl floor, where this can affect the adhesion of the tiles and cause the corners to be twisted.
How to Make Vinyl Floors Shiny?
Before diving into some of the easiest ways to polish vinyl, you need to clean the dirt from the floor. Clean the floor with warm water and a mild detergent mixture.
Use two different mops to get the job done: the first mop for the cleaning solution and the second to remove excess water. Do not leave the soil with water. Puddles are the worst enemies of vinyl.
If water gets into cracked joints, the vinyl will peel off easily, and things can go beyond repair.
Tips to Keep Your Vinyl Floor Glossy
After all the intricate cleaning and shine work, it’s time to keep the shine and shine intact. For best results, use a varnish or a wax-free sealant. When we speak without wax, we mean that.
The vinyl is not waxed and comes with a polyurethane coating on the top. This layer prevents wax from sticking to the surface. So, if you do not use a wax-free varnish, you will get a hard-to-reach plaster.
So if you have vinyl against wax, use a varnish that does not come with wax; before you make a varnish, clean the floor and remove all dirt and dust. We recommend using a broom instead of a vacuum cleaner.
Apply one or two thin layers of glaze to the vinyl. It keeps the ground polished for at least a year. Follow the instructions on the wax container for the best results.
Do not use pasty wax polishers on the vinyl floor. They will leave a film on the floor that accumulates over time.
There is a cost-effective and easy way to give your floor shine: add a few drops of baby oil to this vinegar and water cleansing solution that we mentioned above.
Remember preventive care if you are considering cleaning vinyl floors. Dirt and dust damage each floor’s finish, so keep the carpets in front of the exterior doors to prevent dirt from entering the house.