The washing machine drawer holds detergent and gets in touch with water. And as a result, mould and detergent residue is there.
To keep the washing machine drawer efficient and hygienic, you have to clean the drawer regularly.
Don’t know how to clean the washing machine drawer Hotpoint? Well, Cleaning a washing machine drawer Hotpoint isn’t so difficult.
It is a simple process with some home available ingredients. You can do it yourself without spending money on a professional cleaner or a commercial cleaning solution. How?
Scroll down to know the entire process of cleaning the washing machine drawer.
How to Clean Washing Machine Drawer Hotpoint
Whether you have a front load washing machine or top load washing machine, you can clean it in the same way we described below.
To clean the washing machine drawer you will need some cleaning equipment like white distilled vinegar, hot water, baking soda, dish liquid, toothbrush, clean cloth, sponge, microfiber cloth, etc.
The procedure is as follows:
Step one: The first thing you have to do is turn off the washing machine. Remove the plug and disconnect it. Press the plastic cover and pull the drawer. Make sure you have read the manual, a little mistake can cost you a lot.
Step two: Take a bucket and fill half with hot water and another half with white distilled vinegar. Leave it for one hour and make another solution.
Step three: Take a bowl, add four two cups of warm water, one cup of white vinegar, two tablespoons of baking soda and a few drops of dish liquid.
Mix them well until baking soda dissolves. Pour some solution in a spray bottle and keep some in the bowl.
Step four: Look around the drawer case. Some dirt and mould may stay there. If not, still you have to clean it to remove the cavity.
Take the spray bottle and spray directly on the entire area. Use a toothbrush and scrub the area gently. Wipe away with a clean damp cloth.
Change the cloth and wipe until all residue is gone. Then use a microfiber cloth to absorb the moisture.
Step five: After one hour, remove the drawer from the bucket. Get the bowl with the left solution, dip a sponge in the solution, squeeze extra water and clean the drawer with it.
After cleaning, rinse away with cold water. Lay a towel and place the drawer and other attachments over the towel to absorb extra water. Allow dry naturally.
Step six: After the drawer is dried well, reattach them from where you have to remove them.
Conclusion
Cleaning a washing machine drawer Hotpoint is easy with home ingredients. But if you want you can avoid it and use a commercial washing machine cleaner.
After doing laundry, you can keep the drawer and laundry door open to air circulation. Air circulation will reduce mould growth and foul smell in the washing machine.
After reading the full article on how to clean the washing machine drawer hotpoint, I hope cleaning the drawer has become easy for you.
I am Eric Lewis, a professional cleaner. I’ve been cleaning houses for over 10 years and have experience in every aspect of the job. From scrubbing to sweeping, from washing to vacuuming, I’ve done it all.