How to Get Smell out Of Nutribullet

Sharing is caring!

How to get smell out of nutribullet

If you are struggling to get the awful smell out of your nutribullet, you are not alone. Many of us face this problem and are already frustrated. But not anymore. The problem is easy to solve and doesn’t require any expensive hardware or special instructions – just a little effort on your part. 

Excited to know more on how to get smell out of nutribullet? That’s why we are here for you. Our article outlines the simple steps you need to take to get rid of that terrible smell from nutribullet, so you can achieve success every time! Scroll down and let’s learn more.

How to Get Smell out Of Nutribullet

Getting the smell out of the nutribullet is simple, you just need to use the right product and implement a little technique, that’s all!

Nowadays there are many commercial odor-removing products available in the market, but you just can’t pick anyone to use on your nutribullet. It can get damaged, so you have to be careful while choosing the right product.

That’s why we decided to use some of grandma’s techniques-using home ingredients that are safe. And surprisingly we got amazon results. So we would like to share how you can use home ingredients and get rid of the smell of nutribullet.

Let’s explore more.

Step One: Make a Cleaning Solution

To get the smell out of the nutribullet, we have to make two solutions here. Take a bowl, add 2 cups of warm water, and ¼ cup of dish soap/liquid.

Stir well to mix until bubbles come up. Now make another solution of white vinegar and warm water. Take vinegar and warm water in a bowl in equal quantities and run it for a minute.

Step Two: Use The Cleaning Solution

Pour the solution 1 we just made above. Fill it properly and run it for a minute. Empty it and rinse away with water. This will clear all the dirt the nutribullet has, which is an initial step in removing a bad smell.

If you think lemon is better than dish liquid, you can do so, but lemon is not alone effective in cleaning the nutribullet, so it’s better to use dish soap or liquid, as it’s designed for dirt cleaning along with lemon powder.

Step Three: Clean The Nutribullet

The nutribullet is all free of dirt, now let’s move forward to remove the smell. Fill the nutribullet cup again with solution 2, and rerun it for a minute. Vinegar is an effective cleaner as well as a deodorizer and odor remover.

So it will help you to get rid of the smell. Once done, empty the nutribullet cup, and rinse it with water.

Step Four: Remove The Odor

We have already cleaned the nutribullet 2 times with an effective cleaning agent; hope almost 90% smell is out of it. Because many of us know that vinegar leaves its own odors that we need to get rid of, so let’s do it. Fill the nutribullet cup with warm water, and run it for a minute.

Warm water is enough to remove the vinegar smell, but if it has some, use lemon peels and warm water.  Run the nutribullet for another minute or until the lemon peels have pureed. 

Step Five: Rinse Away

Rinsing the nutribullet is an essential step. Because residues can make it smelly again. So rinse it thoroughly with water.

Before that, give it a scrub with a regular sponge and a drop of dish liquid and warm water mixture. Then rinse it up with tap water or cold water.

Step Six: Dry

After cleaning and rinsing, drying is also important enough. If you don’t dry it immediately or use it again without drying, it will be cloudy, and residue stains will be visible.

So after rinsing, use a soft towel or microfiber cloth to absorb excess moisture, then dry it naturally by keeping it in an upside position, but don’t just upside it; keep something under it, then keep it upside down, so air can circulate.

How To Get The Smell Out of Nutribullet With Hydrogen Peroxide

When the smell is not ready to say goodbye, it’s time to make it say so. How? By using a little more effective odor removing agent. What is that? And how to use it? Let’s know.

Here we will use the versatile baking soda, super-effective hydrogen peroxide, lemon power dish liquid/dish soap, and the must add warm water.

Equipment You Will Need

Baking soda, dish liquid, hydrogen peroxide, warm water, sponge, soft towel, lint-free microfiber cloth, rubber gloves, face mask.

  • Take a gallon of warm water, one cup of baking soda, half a cup of hydrogen peroxide, and half a cup of dish liquid. Stir well until everything dissolves.
  • Fill the nutribullet cup with this cleansing solution, and dip other parts in the gallon. Leave them for one hour.
  • Take a sponge, and scrub gently. Rinse with tap water thoroughly. 
  • Then follow the traditional cleaning method by using dish liquid and warm water. 
  • Finally, pat dry with a soft towel or lint-free microfiber cloth.

( Hydrogen peroxide may cause irritation to the skin, and its air is also not good for health. So before using it, make sure you have worn gloves and a face mask to avoid any inconvenience.)

Know More on Be A Cleaner

Frequently Asked Questions

How Do I Deodorize a Blender?

Fill half of the blending vessel with apple cider vinegar or white vinegar and the other half with warm water. Now turn on the machine and run it for 30 seconds at high speed. Then leave it for one hour. Empty it and rinse away with water. Use a soft cloth or towel to pat dry.

How Do You Clean a Smelly Nutri Bullet?

First, remove any food particles that may be stuck in between the blades, then fill it with warm water and white vinegar in equal quantities and run it for 30-45 seconds and leave for 1 hour. Empty it and clean it with dish soap and warm water. Rinse away thoroughly and pat dry with a soft towel or microfiber cloth.

How Do You Get the Smell out Of a Magic Bullet?

Disassemble the magic bullet, and dip each part of it in mild soap and warm water solution for 1 hour. Then rinse away with water. Wipe down all of the parts with a cloth or paper towel to remove any residual odor.

How Do You Get the Rotten Smell out Of a Blender Bottle?

Make a cleaning solution of one part white vinegar and two-part warm water. Soak the blender bottle in this solution for 5-6 hours or overnight. Next morning, empty it and clean the residue with mild soap and warm water solution. Pat dry with a soft cloth or towel.

How Do You Clean the Inside of A Nutri Bullet?

Dip the nutribullet into warm water for a few hours. Then use a sponge or dishcloth to get into all the nooks and crannies so that everything is cleaned. Take it out and wipe it down with a clean dry cloth, and allow it to dry before using it again.


Many of us find it difficult to get the smell out of nutribullet, and it is; if you don’t know the right way to do it. If you follow the right method it is relatively easy to get the smell out of a nutribullet.

And we have shared such a simple process to get the smell out of the nutribullet above, just follow that and get rid of nasty smell.

If the first one fails to show the magic, you can try the second method, and it will definitely work. Try it and let us know your thoughts.

Leave a Comment